Large Auger coefficient myth in III-nitride LEDs debunked?

0

Credit: CC0 Public Domain

Indium gallium nitride (InGaN)-based, blue-light-emitting diodes are the backbone of solid-state lighting (SSL). Unfortunately, their efficiency peaks under low current densities (2) and rolls off under high injection levels. This effect is called efficiency droop, and requires a design tradeoff between light output power, efficiency, and cost.

It is widely accepted that Auger recombination is the main cause for the experimentally observed large (~50%) efficiency droop in III-Nitride LEDs. Yet, there is no clear understanding of the origin of the magnitude of Auger recombination in this material system. For instance, measured Auger coefficients are obtained by assuming that the electron (n) and hole (p) densities are identical, i.e., n = p. This ambipolar Auger coefficient (Ca) is calculated as the sum of the Auger coefficients for the eeh (Cn) and the hhe (Cp) channels, i.e., Ca = Cn + Cp. For piezoelectric materials such as III-Nitride LEDs, the carrier symmetry is adversely plagued by the polarization, implying the Auger electron–hole asymmetry between Cn and Cp (and hence their ratio, Cn/Cp) might play a critical role in understanding the efficiency droop and quantify the Ca. In most experiments and simulations, Cn/Cp is taken as unity (~1), ignoring the Auger electron–hole asymmetry effect on the efficiency droop.

In a recent paper in the IEEE Journal of Quantum Electronics, U of I researchers report a new open boundary quantum LED simulator based on variational principles to show that electron-hole asymmetry in the Auger recombination is a strong candidate for the origin of the large (~38%) efficiency droop in InGaN-based LEDs. Indeed, the authors show that ignoring the Auger electron-hole asymmetry overestimates the ambipolar Auger coefficient (defined by the equality between electron and hole Auger coefficients) by as much as 62 percent, leading to a misinterpretation in the fundamental limits of InGaN-based LEDs.


The science behind varying performance of different colored LEDs


More information:
Yi-Chia Tsai et al, Effect of Auger Electron–Hole Asymmetry on the Efficiency Droop in InGaN Quantum Well Light-Emitting Diodes, IEEE Journal of Quantum Electronics (2021). DOI: 10.1109/JQE.2021.3137822

Provided by
University of Illinois at Urbana-Champaign


Citation:
Large Auger coefficient myth in III-nitride LEDs debunked? (2022, January 13)
retrieved 14 January 2022
from https://phys.org/news/2022-01-large-auger-coefficient-myth-iii-nitride.html

This document is subject to copyright. Apart from any fair dealing for the purpose of private study or research, no
part may be reproduced without the written permission. The content is provided for information purposes only.

Read original article here

Denial of responsibility! Verve Times is an automatic aggregator of the all world’s media. In each content, the hyperlink to the primary source is specified. All trademarks belong to their rightful owners, all materials to their authors. If you are the owner of the content and do not want us to publish your materials, please contact us by email – [email protected]. The content will be deleted within 24 hours.

Leave a comment
Hello,